Polaris ATV Forum
Go Back   Polaris ATV Forum > Polaris ATV Technical Discussions > ATV Brakes & Suspension
wires to brakes 2003 sportsman 400 wires to brakes 2003 sportsman 400
Home ATV Forum Active Topics ATV Photos Register Members List Search Today's Posts Mark Forums Read

ATV Brakes & Suspension Have a question about your brakes? Need some suspension advice? Try this section for answers

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 12-13-2010, 04:04 PM
Polaris400's Avatar
Junior Member
  
Member #9908
Join Date: Dec 2010
Location: Michigan
Posts: 5
Question wires to brakes 2003 sportsman 400
I just completed putting new drive axle in front right side and noticed some wires that are broke (red,black,white) It looks as if they were from brakes there is a rubber attached to the brakes with one bolt and it looks like wires broken off inside of it. my 4 wheel drive wires are still there. I traced wires and it looks to go to my dash readout i think. havent removed the top plastic yet.. Thanks...
Reply With Quote
Sponsored Links
PolarisATVForums is the premier Polaris ATV Forum on the internet. Registered Users do not see these ads, So Register, It's Free!
  #2 (permalink)  
Old 12-13-2010, 04:20 PM
4getful2's Avatar
Polaris ATV Junkie!
  
Member #1234
Join Date: Aug 2009
Location: illinois
Posts: 1,160
sounds like that is to your speedometer sensor. splice them back together(very small guage wire)using heat shrink or waterproof connectors
Reply With Quote
  #3 (permalink)  
Old 12-13-2010, 04:28 PM
Polaris400's Avatar
Junior Member
  
Member #9908
Join Date: Dec 2010
Location: Michigan
Posts: 5
they are broke inside of rubber so its mto my speedo. sounds like i will have to get a new sensor with wires and attach it to old wireing..thanks 4getful2.......
Reply With Quote
  #4 (permalink)  
Old 12-13-2010, 04:49 PM
shane_zuk's Avatar
ATV Enthusiast
  
Member #8650
Join Date: Oct 2010
Location: Crestview Fl
Posts: 32
Crack it open and solder it back, shouldn't be that hard.
Reply With Quote
Reply

Lower Navigation
Go Back   Polaris ATV Forum > Polaris ATV Technical Discussions > ATV Brakes & Suspension
wires to brakes 2003 sportsman 400 wires to brakes 2003 sportsman 400

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
demand drive wiring no power on grey wires?? cooter ATV Repair and Maintenance 2 10-29-2010 11:52 AM
reverse override wires??850 xp mkeddie ATV Performance Modifications 5 09-10-2010 02:13 AM
ADC electrical wires cut due to poor placement ka-pow Polaris XP 0 07-20-2010 02:15 PM
Electrical wires '09 550XP nmpolaris Polaris XP 5 03-28-2010 05:46 PM
2003 polaris trail boss brakes 03 trail boss ATV Brakes & Suspension 6 12-28-2009 05:28 AM

Powered by vBadvanced CMPS v3.2.1

All times are GMT -8. The time now is 10:53 AM.

Polaris ATV Forum RSS Feeds - Contact Us - Polaris ATV Forum - Archive - Privacy Statement - Top

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2012, vBulletin Solutions, Inc.