Lift kits

[sportsman2x]

Does anyone make lift kit greater than 2 inches for a 2006 sportsman x2 ???

[lost cause]

CATVOS can make pretty much anything you want. Just give them a call.

[phazer07]

I have a to 2 in cuz that that save said for FB joint bro. But seen 4- 6 lifts out there

[polaris50007]

Mike here,like they say,anything over 2" will give you axel problems most likely.I have Gorrilla HD sprigs for a 3" lift and so far after about 700 miles only one axel problem on front.I think was due to being stuck and couldn't get the wheels turn straigt any at all and too much of a bind on it even blowing the bead on the tire.Would like a 6" lift and "A" arms with Gorrilla axels but don't like the price of about $1200.00.Good luck,MIke

[phazer07]

6 in is just to much of a lift

[polaris50007]

Phazor07,if you're gonna lift it why not?The 4" is about the same cost, because you will still need the "A" arms and axels if you don't want the axel problems,Mike

[phazer07]

I got a 2 in lift on mine with 26 tires on 14 in time

[polaris50007]

I have 14-1/2 " ground clearance with 3" lift gorrilla springs and 28" ITP 589's.

[lost cause]

You will not want anything greater than a 3" if you trail ride at speed. It will burn up boots. A 4" to 6" is going to run you about $2,000 and is designed to be in mud/water to keep the axles cool. If you are trying to stay cheap than the 2" is as much as you will want to go without having to upgrade your axles. RDC makes a good 2" lift with the option of a 3" for a couple more $.

[polaris50007]

lostcause,Mike here.I don't remember who I priced the 6" lift from @ about $1200.00 but I know it's been awhile.Didn't realize they are that much now.Who is that from? Good talking to you again,Mike