Atv/ utility trailers

[golf12]

Hi guys.. The snowmobile tilt trailer I had been using is dead now so Its time for a new trailer.. My needs are this.. I have an 850 Touring that I need to haul around and I'll be using it for light duty work in the yard.. Gonna go max 5x10 so I can comfortably keep it in the garage..
Can you guys fire off some pics and your likes or dislikes about what you're using?.. You get what you pay for so I'm going new and figure I should insist on 15" wheels - a 2500lb payload min - tong jack - fold down gate etc.. Anything else I should consider?.. You guys in Canada that have a set up like this, what did you pay new?.. As with most larger ticket items, I'm crying when I see how low the prices are in the u.s vs here.. Thanks in advance for any info..

[rickcj7]

Yeah a 5x10 would fit your atv perfect, yes on tail gate ramp and 15" tires and a <3000 gvw.
$1500 steel and $2500 alum. US prices.

[hemisphere2]

This is the exact same trailer I bought 4 months ago, 3000lb with 15'' tires, and it's a well build trailer. It also has springs on the gate to help lift it back up and a very thick frame, I paid $1275 for mine and I'm happy with it.
American Trailers & Trailer4all 2012 PJ U6101

[shui5612]

here you go...
if it doesnt show up, heres the link to the image.
161.jpg picture by shui5612 - Photobucket

its a remeq trailer, payed 1250-1400$( dont renember eactly as i bought afew things ) new , its galvanized. not sure about rims but im thinking they are 13"... leaf springs..

2700-ish capacity (minus trailer weight it leaves 2570 or something like that)
its considered a 5x10 but the interior size is 55"(insted of 60) and its about 9ft and 9inches. (and not 10 ft)
its made by remeq. (made in quebec)

rear gate is more than enough for an atv, sorry for the bad-ish pic as it was taken for my trailer project ( carry 2 atvs on a one place trailer) the floor is plywood.

if you have any more questions, just ask.

hope i helped.

P.S. look around the album there are more pics of the trailer there aswell.

[ZEUS]

I have a 7x11 for my 2 ATVs. I can fit 3 without problem.

[shui5612]

how do you fit 2-3 atvs on there? as in sideways? like on my build?

btw it is without sides? just a platform?

[850trailrider]

got a 5x10 from proline located in NH. all alluminium 2200gvw 13 inch wheels fold down ramp spare tire and tongue jack off season for 1495.00 reg 1795.00 got the last one this fall they will custom build one for you if you can wait and building more in summer Aluminum Trailer, Snowmobile Trailer, Motorcycle Trailer small comp. great to deal with IMOutil510c-full.jpg

util510g-full.jpg

[ZEUS]

In my 7x11 like this 3500 heavy duty axe. Also the trailer have brakes.

In the picture i show only the Polaris but you can see the extra space. Also i load the quads with the aluminum Ramps that you can see in the pictures.

[Russ C]

dont know how you could fit 3-4ft wide atvs on an 11 ft long trailer, doesnt add up, must stack them on top of each other lol.

[antoniodef]

Get a trailer with a fold down ramp. Carrying ramps is a PITA.

Sent from my SCH-I510 using Tapatalk