Christmas Good To Scrammy, But... - Polaris ATV Forum
Polaris ATV Forum
Go Back   Polaris ATV Forum > Polaris ATV Technical Discussions > ATV Performance Modifications

ATV Performance Modifications Have Modifications? Want to ask about a mod? Having problems with a certain mod? Ask and post here! Carbs, Exhausts, Engines, Etc...

Reply
 
LinkBack Thread Tools Display Modes
  #1 (permalink)  
Old 12-18-2016, 06:00 AM
autosport7's Avatar
Extreme ATV Enthusiast
 
Member #46868
Join Date: Sep 2014
Posts: 412
Christmas Good To Scrammy, But...

So I have an EPI Clutch and Big Gun Exhaust on order.
Once received the Scrammy will be making its way to the dealer for full service. While they have it, I will have them install a new belt for preventative maintenance. While they are in there I will have them install the clutch and silicone my belt housing to hopefully seal it up some from water.

My question is, since I am upgrading my clutch, is there a performance belt out there I should be running with the upgraded clutch or even just better than the oem belt?

I haven't had any issues with the stock one but figure while it's in for fluids why wait for a failure before replacing.
__________________

2015 Polaris Scrambler XP1000
Red Bull Graphics Kit
Pure Polaris Hand Warmers
Pure Polaris Thumb Warmer
GBC Grim Reaper - 27/9/14 - 27/11/14
Race Driven Brake Pads FR/RR - PURE JUNK
All Balls Wheel Bearings FR/RR
ROX Speed FX Foot Pegs
CECCO Frame Braces FR/RR
CECCO Diff Cover
Uni Air Filter
EPI Clutch
Big Gun Exhaust
Fasst Flexx Handlebars
ROX 2" Risers
Powermadd Sentenial Handguards
Renthal G169 Grips
Reply With Quote
Sponsored Links
PolarisATVForums is the premier Polaris ATV Forum on the internet. Registered Users do not see these ads, So Register, It's Free!
  #2 (permalink)  
Old 12-18-2016, 09:17 AM
chronix79's Avatar
Polaris ATV Legend
Premium Member
 
Member #3544
Join Date: Mar 2010
Location: louisiana
Posts: 1,604
Before every Joe Blow chimes in and says the cheap belt they bought at NAPA for their trail boss 330 has lasted them 10 years, you might want to explain your riding style and terrain.

I'm a pretty aggressive rider that likes to jump shit and doesn't take it easy on the ole girl at all so I refuse to use anything but the OEM belt. I change mine about every 1000 miles whether it needs it or not just so I'm not left trying to change it on the side of the trail. Also, if the old belt is still in good condition I'll keep it as a spare in case something does happen while I'm out riding by myself.

did you go with the dual Big Gun?
__________________
2014 Scrambler 1000 xp
  • R2C Filter
  • NGK Spark Plugs
  • Quadboss 2" Receiver
  • Cecco Front & Rear A-Arm braces
  • ODI Rogue Grips W/ Red Clamps
  • 26" Bear Claw HTRs
  • Pelican Cases Front & Rear
  • Jccapri Full Bushing Set
  • Flexx Bars
  • 2" Rox Risers
  • Elka Stage 4 Shocks
  • Sirius Pro 10" Light bar
Reply With Quote
  #3 (permalink)  
Old 12-18-2016, 09:26 AM
autosport7's Avatar
Extreme ATV Enthusiast
 
Member #46868
Join Date: Sep 2014
Posts: 412
Yes dual big gun, but just went slip on as the only real benefit from full or slip on is weight loss and sound. Spoke to quite a few peeps in the industry and all have agreed there is no real benefit of going "full". May pick up 1hp over stock.

As for my riding style, the Scrammy gets no rest while I'm on it. Jumps, berms, climbs, technical, fast, mud, you name it, it has been through it as hard as it can be pushed.

Thanks Chronix, I just didn't know if a reputable company is out there building better quality than oem. I'm not looking for cheap or junk, I'm looking for the best! If that's oem then I'll stick with oem.
Great idea on the one coming out to save as a backup.
__________________

2015 Polaris Scrambler XP1000
Red Bull Graphics Kit
Pure Polaris Hand Warmers
Pure Polaris Thumb Warmer
GBC Grim Reaper - 27/9/14 - 27/11/14
Race Driven Brake Pads FR/RR - PURE JUNK
All Balls Wheel Bearings FR/RR
ROX Speed FX Foot Pegs
CECCO Frame Braces FR/RR
CECCO Diff Cover
Uni Air Filter
EPI Clutch
Big Gun Exhaust
Fasst Flexx Handlebars
ROX 2" Risers
Powermadd Sentenial Handguards
Renthal G169 Grips
Reply With Quote
  #4 (permalink)  
Old 12-18-2016, 02:05 PM
chronix79's Avatar
Polaris ATV Legend
Premium Member
 
Member #3544
Join Date: Mar 2010
Location: louisiana
Posts: 1,604
True...As far as picking up power goes, I've heard good things about the new tune RVS just released a few weeks ago.

They do have some other belts out there like the Dayco xtx, Gates g force and Hypermax that some have had success with but I just feel better using the stock belt.
__________________
2014 Scrambler 1000 xp
  • R2C Filter
  • NGK Spark Plugs
  • Quadboss 2" Receiver
  • Cecco Front & Rear A-Arm braces
  • ODI Rogue Grips W/ Red Clamps
  • 26" Bear Claw HTRs
  • Pelican Cases Front & Rear
  • Jccapri Full Bushing Set
  • Flexx Bars
  • 2" Rox Risers
  • Elka Stage 4 Shocks
  • Sirius Pro 10" Light bar
Reply With Quote
  #5 (permalink)  
Old 12-18-2016, 05:19 PM
sportsmandan's Avatar
Extreme ATV Enthusiast
 
Member #38721
Join Date: Sep 2013
Location: Ontario,Canada
Posts: 205
OEM belts for me, never had a issue with them,
post up a vid once mufflers are on,
No spark arrestors ?
Reply With Quote
  #6 (permalink)  
Old 12-18-2016, 05:29 PM
autosport7's Avatar
Extreme ATV Enthusiast
 
Member #46868
Join Date: Sep 2014
Posts: 412
Quote:
Originally Posted by chronix79 View Post
True...As far as picking up power goes, I've heard good things about the new tune RVS just released a few weeks ago.

They do have some other belts out there like the Dayco xtx, Gates g force and Hypermax that some have had success with but I just feel better using the stock belt.
I'm def going to be looking into a tune and the RVS is the first in my list to check out.

Quote:
Originally Posted by sportsmandan View Post
OEM belts for me, never had a issue with them,
post up a vid once mufflers are on,
No spark arrestors ?
Sure l'll post something up.

Others I've asked about shared the same sentiments about sticking with oem. I don't think I'll be switching. Thanks for your inputs fellas.
__________________

2015 Polaris Scrambler XP1000
Red Bull Graphics Kit
Pure Polaris Hand Warmers
Pure Polaris Thumb Warmer
GBC Grim Reaper - 27/9/14 - 27/11/14
Race Driven Brake Pads FR/RR - PURE JUNK
All Balls Wheel Bearings FR/RR
ROX Speed FX Foot Pegs
CECCO Frame Braces FR/RR
CECCO Diff Cover
Uni Air Filter
EPI Clutch
Big Gun Exhaust
Fasst Flexx Handlebars
ROX 2" Risers
Powermadd Sentenial Handguards
Renthal G169 Grips
Reply With Quote
Reply

Lower Navigation
Go Back   Polaris ATV Forum > Polaris ATV Technical Discussions > ATV Performance Modifications


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Canadian Good Deal? sp.campbell ATV Purchasing and Price 16 11-23-2016 07:52 PM
2003 Sportsman 90, only runs good with choke on a little coreyr6624 Polaris Sportsman 0 10-16-2016 06:29 PM
Good deal or not? Mr.T ATV General Discussion 10 10-16-2016 02:02 PM
Good Deal on Kenda Bear Claw HTR Tires ngiovas ATV Wheels & Tires 102 07-04-2016 09:43 AM
Merry christmas to all mowman Around The Garage 13 12-23-2015 08:35 AM


All times are GMT -8. The time now is 10:17 PM.



Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.