|
Fuel mapping
When i hit wot from a standstill my sportsman 800 (2008) skips a little bit at 4000 rpm or so sometimes into 5000. it sounds like its hitting the rev limmiter but obviously its not, it cleans up and works good after that until it actually hits the rev limiter. I have a pc3 to program it but am not to sure where to start.
Modified stock exhaust, k&n filter
Custom epi clutching
Pipe mod included eliminating left side muffler, cutting hole in back of right pipe and exhausting 1.5" gutted some baffles as well.
forgot to mention i am also running a fuel mixture of about 5 litres of VP110 to a tank of regular
Last edited by banjo; 08-01-2011 at 06:10 AM.
|
Linear Mode
