neandrathal

i run a uni 2 stage foam filter. I dont actually run a pre- filter but the uni 2 stage is a foam inner and a foam outter filter both are cleanable and seperate.

nevermind lol i found em on there thank youu very much...................awesome do you by chance know what size those allen bolts are?/ how many do i need?\



do you think that same jet set will work for me? i dont have the bigg bore yet?

i also run the uni clamp on filter and pure polaris pipe. stock cdi and a 558 big bore kit
on gearing depending on the track i run 13,14 and 15 fronts and 36, 37 and 38 rears
stock cams and valves

Jets R Us POLARIS PREDATOR 500 i run this jet kit everything in my carb is stock other then the main jet and needle position. i run a 162.5 main and needle in 3rd spot from the blunt end. when you order it or if you order it also order the float bowl allen head bolt kit also.

I RUN THE STOCK PURE POLARIS ITS ONE OF THE BETTER EXHAUST TOO HAVE.....................MORE BOTTOM END IS WHAT IM GOING FOR TOO JUST GET A LARGER FRONT SPROCKET EITHER OR A 14 OR A 15 IM GONNA GO WITH THE 15 AND IF YOU WANT MORE THAN YOU'LL HAVE TOO GET A SMALLER REAR SPROCKET


http://www.polarisatvforums.com/foru...5-progress.jpg

Yeah, I will probably do the same
Id like it to have alittle more bottom

What kind of exhaust you have?

Thank you, i have alot of work to do but i enjoy it thouroughly and love the power i almost fell off plenty of times already lol................good luck with the build and let me see when you start progress, as i will update my progress as i go

Wow man, you have a beautiful bike. Next winter I'm planning on tearing mine down and cleaning it up a bit. I love it so far, never drove something with so much raw power...