new memeber and questions

scooter996 · #1 (**permalink**) 08-22-2011, 07:43 AM

Just picked up a mechanically clean 21006 OUTLAW 500. Just went out with the son and when after being washed the brake light stayed on. This morning is was off when I started the bike. I went though the connections to rule anything out and no luck. Any ideas of what I may have missed?

Im also new to quads, not motorcycle. How does one know when wheel bearings need replacement or when they are going bad? I work for EXXON MOBIL so obviously I re-greased and oiled everything but wasn't sure if I was able to get to the wheel bearings or if they are sealed or not. Any info, help or what problems I may come across with ownership would be great. Thanks

mikpeet · #2 (**permalink**) 08-23-2011, 08:18 AM

Mine does the same. I had it narrowed down to what switch it was but I can't even remember that right now. Happens every time it gets hosed down and works fine the following day. I'll post a reply if I ever dig into it. Let me know if you find something.

scooter996 · #3 (**permalink**) 08-23-2011, 01:56 PM

Thanks, any help or pics would be greats so I know where NOT to spray.

speedfreek · #4 (**permalink**) 08-25-2011, 04:22 PM

Quote:

Originally Posted by scooter996

How does one know when wheel bearings need replacement or when they are going bad?

Lift the front end off the ground and grab the tire at the top and bottom, push in at the top and back and forth at the bottom. If they are worn, they will move noticeably. Pretty easy to do. But I dont know if you can understand my directions