01-11-2012, 03:27 PM
|
 |
Junior Member
|
|
Member #10176
Join Date: Dec 2010
Posts: 15
|
|
Speedo-Healer fix a tracked ATV Speedo?
I have an '08 Sportsman 800 with Tatou 4s tracks. Everyone knows the speedometer and odometers are inaccurate because of the different size sprockets on the tracks. Does anyone know if a Speedo-Healer can be installed on our machines to correct this. When talking to the rep he said all you really need is a separate signal wire, which I believe we have. I think from the Hall Sensor we have Red-power, White-signal, and Black-ground. Is this correct? From reading their info their newest version has two settings, so we could switch to the tire setting when we take the tracks off, and switch back to the track setting when we put them back on. Wouldn't that be cool? 
__________________
2008 Sportsman 800 Twin H.O., Tatou 4s Tracks, Lock & Ride Rear Cargo Box, Front Rack, Kolpin Gun Boot and Mount, Windshield, Moose two zone Grip and Throttle warmer, RotoPax fuel packs and mounts, Maier Overfenders, RAM GPS handlebar mount, Heavy Duty front Springs, American Mfg. Eagle II Trax plow mount and push tube w/60" Eagle Plow, Polaris 3500# winch w/synthetic cable, 3 beam headlight mod chip, Polaris wireless winch remote, Stinger Auger Carrier, and the kitchen sink.
|
Linear Mode
