polaris 250 trailblazer belt slipping

230junky · #1 (**permalink**) 01-10-2011, 04:30 PM

i got a 2000 trailblazer i pick it up for a deal but have a few problems, the belt is slipping ive replaced the belt, flushed the trans, once i put the new belt on seem to do better but still not feeling rite to me just seem like when you hit the gas there an delay and feel realy slugish even on flat ground, the motor start find and runs good need help bad. just want to know is it the cluches and if so what the best setup to go with

**Bruce!** · #2 (**permalink**) 01-10-2011, 05:26 PM

Welcome to the board!

jdereu · #3 (**permalink**) 01-11-2011, 07:10 PM

I own the same bike as you do and got a good deal on mine also. Its a good bike i just really cant get much bite out of it either though

sledsrus1 · #4 (**permalink**) 03-16-2011, 08:16 AM

I have a 99 TB and my weights on the clutch froze up. Check that first.

dwhst9 · #5 (**permalink**) 03-16-2011, 09:35 AM

Could also be worn clutch buttons on the secondary.

230junky · #6 (**permalink**) 04-07-2011, 07:57 PM

okay thanks for the help, I call rick and got the new springs and bottons also the oil kit and cable. so im going to install the parts tomar and let you guys know what happens

230junky · #7 (**permalink**) 04-09-2011, 12:58 PM

okay got the new springs and buttons in and went with some 23x10x10 swamp foxes man it make a hella of a difference. now she is doing what she surpose to do no slipping no sturgling to go up hills pulls all the out to top rev