Polaris ATV Forum - View Single Post - One front wheel not driven
View Single Post
post #6 of (permalink) Old 05-14-2019, 12:41 PM Thread Starter
Junior Member
Chillin_Dylan's Avatar
Join Date: May 2019
Posts: 25
My buzzer sounds with continuity. I also checked with my continuity light. I didnít think to check continuity to ground, I will do that next. This is the first Iím hearing of there being slippage sensors. With the quad running on jack stands, the moment I put it in gear the functioning front wheel starts turning with the rears. The seem locked together just by eye, but I honestly donít know for sure. Also, as I mentioned in my original post, the 4x4 worked perfectly before the first broken wire incident, and continued to work perfectly once I repaired them. Wishing I wouldíve realized there was lots of slack wire for the original coil tucked inside the loom and just repaired them again. :banging head:

Sent from my iPhone using Tapatalk
Chillin_Dylan is offline  
For the best viewing experience please update your browser to Google Chrome