Not a Polaris, but I need help!
Working on a 2001 Yamaha Warrior 350. I fixed his wife's Xplorer last spring so this one came to me because it wouldn't run and had just been sitting. Found the coil bad and cleaned the carb, new air filter. Fired right up but won't take any throttle. I have tried adding air and fuel as I start to open the throttle and it just pops and sputters but won't raise the RPM. Exhaust is open. Slide opens with a linkage to the throttle. All the same size jets went back in. I even ran it through the ultra sonic cleaner.
Any thoughts would be appreciated!
Mine: 2018 Sportsman 850SP - 26" Bear Claw HTRs on OEM steel wheels(I really don't like the Aluminum ones)
Polaris Hand warmers, Mirrors.
Hers: 2019 Sportsman 450. 26" Bear Claw HTRs on Moose 427X Wheels.
2007 Sportsman 500 EFI, Polaris Winch, 25" Bear Claws QSC Clutch Kit, Hand Warmers
2001 Magnum 325 MOSE 12" rear wheel conversion. 25" Sedona Coyote tires
2017 Polaris Ranger 1000XP - Roof and front glass
2018 Kawasaki KLR650
2001 Magnum 325 Warn winch and Moose 60" plow-Sent to Daughter and Son-In-Law since his blew up
SOLD 2004 Sportsman 600 Twin