Rear slip yoke on front prop shaft issue!!! - Polaris ATV Forum
ATV General Discussion General Discussions about Polaris ATVs.

 
LinkBack Thread Tools Display Modes
post #1 of 8 (permalink) Old 08-12-2019, 02:27 PM Thread Starter
Junior Member
 
800sportz50th's Avatar
 
Join Date: Sep 2017
Posts: 10
Rear slip yoke on front prop shaft issue!!!

The slip yoke on the front prop shaft, even after changing the yoke and u joints still seems to be hitting my engine, digging into the engine housing a little bit! Idno how thick the case is but it freaks me out!! How ever it was like that for a while already and hasnt seem to have gotten worse. But its a sketchy situation. As if its wears through the housing than im up sh*ts creek. I cant make it hit the engine by hand, i guess it hits it when its under load. Anyone else ever had this issue or know someone who has?? Id sell it but id feel to bad if the next guy had major trouble.
800sportz50th is offline  
Sponsored Links
Advertisement
 
post #2 of 8 (permalink) Old 08-12-2019, 02:56 PM
Premium Member
 
FPD218's Avatar
 
Join Date: Aug 2016
Location: Winter, Wi
Posts: 979
Garage
Check for a broken motor mount.....


.



JUNE 2017 & SEPTEMBER 2018 POLARIS FORUM ATV OF THE MONTH WINNER

2019 Sportsman 850 SP Premium

Removed all Warning Decals
3500# Polaris Winch W/Synthetic Rope
Winch Stopper Cable Line Saver
ATV-GURU.COM Front and Rear Bumpers
2" Receiver in Front Bumper
Kenda K587 HTR Bear Claws 26X9X14 & 26X11X14
Ultimate Series Windshield Fairing, Mid & Low Height Windshield
New Style Polaris Lock & Ride Rear Storage Box
Garmin GPS176C, Ram Mount
Polaris Rear View Mirrors
4" Front Rack Extender
Center Brake/Tail Light LED
Rear LED work lights/strobes



Built on March 27 2019
Purchased New April 13 2019 0.1 Hr .2 Mi
Power Sports Abrams, Wi





SOLD
2006 Sportsman 800 EFI Twin
Purchased new to me on Aug 08 2016 97Hr's 811Mi
Sold Apr 07 2019 231 Hr 3126 Mi



https://www.youtube.com/watch?time_c...&v=k6Nlb_qRoeg

"I am the majority!"


*WEAR A HELMET, I'M LIVING PROOF THEY WORK!
FPD218 is offline  
post #3 of 8 (permalink) Old 08-12-2019, 03:29 PM
Premium Member
 
bp405's Avatar
 
Join Date: Sep 2011
Location: New York
Posts: 7,013
^^^^^^Dito!!!!

2011 Sportsman® 800 EFI
GURU front brush guard
GURU rear brush guard
Polaris front lock n ride cargo box
Polaris rear rack extender
Warn RT 3.0 winch w/amsteel synthetic line
Viper aluminum haus fairlead
Polaris front spring adjusters
Ricochet a-arm guards
Ricochet full frame skid plate
ITP T-7 beadlock 14" w/OMF inner rim guards
Maxxis big horn 2.0 26x9 front
Maxxis big horn 2.0 26x11 rear
QSC clutch kit
EPI HD springs front n rear
ODI rogue 130mm grips
Ultraseal commercial grade tire sealant (front)
Highlifter tire sealant (rear)
CTEK 3300 battery maintainer
added 7 zerks
beefed up wiring harness
OGIO rear bag
ROTOPAX 1gal. + 2gal. gasoline can
Jccapri bushing kit
Kolpin Over Fenders
Rigid Industries E-Series 10" flood
Walker Evans struts
NGK Iridium's (2,500 miles on Champion's and they looked great!)
Odyssey Extreme battery PC545

2018 Sportsman® 570-T
2019 Aluma® A8818
2020 Outlander® 1000R XXC (on order, ETA mid-Sept)
bp405 is offline  
Sponsored Links
Advertisement
 
post #4 of 8 (permalink) Old 08-12-2019, 03:30 PM
Premium Member
 
bp405's Avatar
 
Join Date: Sep 2011
Location: New York
Posts: 7,013
Oh there are three on the bottom side of the motor.

2011 Sportsman® 800 EFI
GURU front brush guard
GURU rear brush guard
Polaris front lock n ride cargo box
Polaris rear rack extender
Warn RT 3.0 winch w/amsteel synthetic line
Viper aluminum haus fairlead
Polaris front spring adjusters
Ricochet a-arm guards
Ricochet full frame skid plate
ITP T-7 beadlock 14" w/OMF inner rim guards
Maxxis big horn 2.0 26x9 front
Maxxis big horn 2.0 26x11 rear
QSC clutch kit
EPI HD springs front n rear
ODI rogue 130mm grips
Ultraseal commercial grade tire sealant (front)
Highlifter tire sealant (rear)
CTEK 3300 battery maintainer
added 7 zerks
beefed up wiring harness
OGIO rear bag
ROTOPAX 1gal. + 2gal. gasoline can
Jccapri bushing kit
Kolpin Over Fenders
Rigid Industries E-Series 10" flood
Walker Evans struts
NGK Iridium's (2,500 miles on Champion's and they looked great!)
Odyssey Extreme battery PC545

2018 Sportsman® 570-T
2019 Aluma® A8818
2020 Outlander® 1000R XXC (on order, ETA mid-Sept)
bp405 is offline  
post #5 of 8 (permalink) Old 08-12-2019, 04:34 PM Thread Starter
Junior Member
 
800sportz50th's Avatar
 
Join Date: Sep 2017
Posts: 10
Just checked all the motor mounts, there all fine and tight. Heres a pick of where its hitting. Can see where its starting to shave away at the housing. Are the cases fairly thick?
Attached Thumbnails
Click image for larger version

Name:	20190812_193306_1565656393149.jpg
Views:	12
Size:	3.90 MB
ID:	119543  
800sportz50th is offline  
post #6 of 8 (permalink) Old 08-13-2019, 04:00 AM
Premium Member
 
bp405's Avatar
 
Join Date: Sep 2011
Location: New York
Posts: 7,013
Regardless if the case is thick or not you have a problem!!! Something is bent, loose, and/or broken.

What slip yoke did use?

2011 Sportsman® 800 EFI
GURU front brush guard
GURU rear brush guard
Polaris front lock n ride cargo box
Polaris rear rack extender
Warn RT 3.0 winch w/amsteel synthetic line
Viper aluminum haus fairlead
Polaris front spring adjusters
Ricochet a-arm guards
Ricochet full frame skid plate
ITP T-7 beadlock 14" w/OMF inner rim guards
Maxxis big horn 2.0 26x9 front
Maxxis big horn 2.0 26x11 rear
QSC clutch kit
EPI HD springs front n rear
ODI rogue 130mm grips
Ultraseal commercial grade tire sealant (front)
Highlifter tire sealant (rear)
CTEK 3300 battery maintainer
added 7 zerks
beefed up wiring harness
OGIO rear bag
ROTOPAX 1gal. + 2gal. gasoline can
Jccapri bushing kit
Kolpin Over Fenders
Rigid Industries E-Series 10" flood
Walker Evans struts
NGK Iridium's (2,500 miles on Champion's and they looked great!)
Odyssey Extreme battery PC545

2018 Sportsman® 570-T
2019 Aluma® A8818
2020 Outlander® 1000R XXC (on order, ETA mid-Sept)
bp405 is offline  
post #7 of 8 (permalink) Old 08-13-2019, 09:44 AM
Moderator
 
polman500's Avatar
 
Join Date: Nov 2009
Location: SE Kentucky
Posts: 8,304
Its a very close fit right there. The old one may have been rubbing because it was loose and wobbly. If the new one is also doing it you probably need to loosen the front mount and torque it over to the left as far as possible while tightening the mount back down. That front mount has a slotted hole.
polman500 is offline  
post #8 of 8 (permalink) Old 08-13-2019, 09:50 AM Thread Starter
Junior Member
 
800sportz50th's Avatar
 
Join Date: Sep 2017
Posts: 10
I dont remember what brand of yoke i used and ill try and see if I can move the engine over a bit
800sportz50th is offline  
Reply

  Lower Navigation
Go Back   Polaris ATV Forum > Polaris ATV Discussions > ATV General Discussion

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Polaris ATV Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome