Polaris ATV Forum banner

desperate need help

1K views 3 replies 2 participants last post by  RVS Performance 
#1 ·
The ignition switch was stolen off my 95 425 magnum I have got a new one but do not know where to hook wires up to and if they are hot or not can anyone help me.
 
#4 ·
If you look in the junction box you will see spade connectors with the same colored wires plugged in next to the empty ones. Might be able to figure it out, but otherwise you need to get a manual for the wiring diagram. Going to be near impossible to tell you on here. Plug the red to red, brown to brown, black to black, and red/black to red/black doesn't really help much.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top