Polaris ATV Junkie!
Join Date: Nov 2012
Location: Uxbridge, Ontario
There is a detailed TPS initialization procedure that involves "establishing zero offset voltage. This step is crucial as it sets the TPS position using a fixed physical stop. This will insure that the correct offset voltage is reached once the correct throttle body flow is set."
Do you have this procedure? If not, I can post it.
2012 850HO Touring EPS Pearl White
27" ITP XTR radials on 14" ITP SS212 wheels
Ricochet skid plates & A-arm guards
Rubberdown 1 1/2" lift
Cecco frame braces
JC Capri bushings
Rotopax fuel packs on custom mounts
Garmin 60CSx with Ram mount
Polaris 2500# winch with synthetic rope
Polaris front & rear brush guards
Polaris bar & thumb heaters
Polaris passenger grip heaters
NGK (6043) ILZKAR7A10 plugs
Good, fast, cheap.....pick 2!
Last edited by mvn; 06-14-2019 at 06:03 AM.