Polaris ATV Forum banner

Search results

1-6 of 6 Results
Advanced Search
  1. Sportsman 700 gas tank and fuel pump corrosion

    ATV Repair and Maintenance
    Thank you for the info, very helpful. I must have worded it wrong, but I meant to say that I use ethanol free gas 90% of time. I will follow instructions to remove corrosion.
  2. Sportsman 700 gas tank and fuel pump corrosion

    ATV Repair and Maintenance
    About 6 months ago I replaced the fuel pump and regulator in my 2007 sportsman 700. At that time I didn't notice and corrosion. After replacing everything worked great. I drive it fairly regularly but it might have sat for a few weeks 1 or 2 times. I have used about 90% ethanol gas since. A few...
  3. 05 Magnum no power

    Polaris Magnum
    Yes. The speedo does NOT have to be working. I ended up replacing the kill switch and then the starter and it fired right up. Speedo still doesn't work and seeing how that costs $280, I will just leave it that way.
  4. Starter Bendix is loose

    ATV Repair and Maintenance
    Thanks for the help. I guess I didn't know that was a bushing! I will replace and see if that fixes the problem. Thanks again
  5. Starter Bendix is loose

    ATV Repair and Maintenance
    I recently repaired a 2005 Polaris Magnum and replaced the starter, flywheel and the starter Bendix. It starts up but makes an awful sound when doing so. As soon as it starts it runs great. I have narrowed it down to what I think is a problem with where the Bendix sits. There is a small chip...
  6. 05 Magnum no power

    Polaris Magnum
    I recently was given an 05 magnum 330. I replaced the whole wiring harness and the starter solenoid. I have no power. The speedo is obviously toast. My question is, does the speed HAVE to be working for me to be able to start or should I be checking other things? I cleaned the kill switch as I...
1-6 of 6 Results
Top