Polaris ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. ATV Repair and Maintenance
    Hey guys! New to the forum so going to say hello first! Hopefully i'm in the right spot. Did some research only really finding things about spongy brake pedals. I have a 96 Xplorer 400 and it seems as though the foot brake pedal is actually right up against the body and was wondering if there...
  2. Polaris ATV How-Tos
    Newbie here with a question. My 330 would not start, starter fluid/charger jump had it run for 20 sec. Took it apart carefully, took off carb bowl, cleaned out float needle, gas inlet, etc. Blew out with air. Put mostly back together (left plastic panel, seat). It keep running on new reg gas (no...
  3. Polaris Trail Blazer
    I had to replace buttons in secondary clutch and not sure which setting to set spring at. I set it at 2 -2 but now it tops out at about 30 mph now and its rapped out. Is this setting too high? Is factory more like a 1-2? It doesn't feel like its shifting fully through the range only aboit half...
  4. ATV Brakes & Suspension
    Hey guys, new to the forum so HELLO...got a quick question, I'm putting a 2 in lift on the front of my sportsman 800 and i would like to lift the rear as well...If I turn the adjustment piece on the bottom of the rear shock will that give me any lift or will it simply make the shocks stiffer? Thanks
  5. Polaris Trail Boss
    :motz:I think i have a 92 polaris trail boss 350 liquid cooled 2x4 and its running way rich after i had the carb rebuilt i watched the guy rebuild it and there were no parts left over the bike sat for acouple year not really rode it starts and idles ok but when u give it gas it spudders till it...
  6. Polaris Magnum
    The front sprocket on my Magnum is tore up. Has almost no teeth to it and I need to change it. I went to the Polaris store and got the right sprocket and now I need help as to how I change the front sprocket. Thanks in advance for any help.
  7. ATV Repair and Maintenance
    This is the video of my 96 Polaris Sportsman 400 4x4. The clutch is slipping and I don't know why. It is a new belt and the clutch doesn't appear to be worn or have any burrs on it. Please help!!!
  8. ATV Repair and Maintenance
    The ATV goes into gear just fine now that I adjusted the linkage, but the belt slips real bad and makes a loud whining noise. It is a brand new belt. I rode it with the clutch cover off and it looks like the clutch overspeeds when I have to many RPMs. I say this because when I let off the gas I...
1-8 of 8 Results