Polaris ATV Forum banner
1-16 of 16 Results
  1. ATV General Discussion
    Hello Everyone, I have a question about adding a trailer hitch to a 2006 or 2007 Sawtooth. I have search all over the interwebs and was unable to locate any aftermarket or bolt on. I realize the sawtooth isn't the most ideal atv for pulling, or even a very popular atv, but it was free so...
  2. ATV Repair and Maintenance
    I have a 2008 Sportsman 500 EFI Touring. Last weekend I go out to start it and all I get is click click click. Battery is putting out nearly 14 volts. Voltage regulator is newish, and I think working fine. I have determined it is the starter. I will pull it to bench test, but even banging...
  3. Polaris Scrambler XP
    I am new to this forum, however I have done quite a bit of searching online to find some good aftermarket wheel / tire setups for the Scrambler 850xp with not the greatest of luck. I'm mainly curious to see what wheel, wheel offset, and tire people have gone with. If you post a picture, please...
  4. Polaris Sportsman 570
    I have a 2015 Sportsman 570 and I just installed a winch. Now all I need is the plow. It appears the glacier system is a bit pricey and has a good possibility of failing or welds breaking. I have read through the forums and I am not 100% sold on that system. Is there a good aftermarket plow...
  5. ATV Wheels & Tires
    Bought a Polaris Predator 500 about 2-3 weeks ago. And 2nd ride lost a front tire due to stripped lugnuts.. Bought some new ones and noticed they did the same thing.. Studs seem kind of short.. The wheels on the bike are not stock which I assume is causing the problem not sure what brand the...
  6. 1995 Polaris Magnum Vintage Frame up Rebuild

    This was a project I worked on for about 3 months. I bought this ATV for $475. It ran, and that was about it. I took it home and tore it down to the frame and started ordering parts. I repainted everything from frame up, and rebuilt/replaced anything everything that looked like it needed replaced. I
  7. Polaris XP
    My primary is jammed/broken on my 2011 sportsman 850 so I could either get it fixed or get a better aftermarket one. And i would rather get a new one if i can, and if its much better. I don't like the ''smooth'' acceleration on the 850, i put a QSC clutch kit and its better but still not like...
  8. ATV Parts for Sale
    Hey all I am looking for an aftermarket exhaust for my 2012 Sportsman 500 HO. It must have the spark arrestor. Please post here or PM me. I have PayPal ready. Thanks in advance, Shane
  9. ATV General Discussion
    Hey guys A team consisting of myself and students from both Babson College in Wellesley, MA and FHS St. Gallen, Switzerland are conducting research on the powersports industry and aftermarket accessories for them, namely motorcycles (of all kinds), ATVs/UTVs, personal watercraft (jetskis) and...
  10. ATV General Discussion
    I absolutely hate the way 500 starters sound. I know that these starters are noisy anyway, but mine sometimes even tries to hang up and sounds rough. Is there any kind of aftermarket starters for this bike?
  11. ATV Brakes & Suspension
    I am looking to replace my factory shocks. Any advise on aftermarket shocks for a 2012 Sportsman 500 HO would greatly appreciated. Thanks
  12. ATV Performance Modifications
    So I bought a Big Gun exhaust for my 2013 Polaris Sportsman 500. I think to myself "Yea! This is gonna be real easy". Boy was I wrong. I'm having the issue of getting the pipe that is connected to the muffler over the header pipe. I've got it squeezed on about an inch and a half. But it still...
  13. ATVs For Sale
    I have a 2010 Outlaw 450 with a lot of aftermarket parts. I purchased it from a dealer in June 2012. It has always been well maintained and is really clean. It is located in Illinois. I am asking $5500 obo. Upgrades: Rath push bar Rath Grab bar Rath Signature Series Nerf Bars with Monster Peg...
  14. ATV Performance Modifications
    I purchased a JE Big Bore kit for my 03 Polaris Predator 500. I was forced to get a 12.5:1. I don't want to run race gas and was wondering how much I would have to have the piston machined down to lower the compression to 11:1. Please help parts are almost done at the shop and I want to get it...
  15. ATV Performance Modifications
    Hey guys does anyone know of aftermarket A-arms for the 850 xp? I just noticed that i have a slight bend in one and was looking for replacements but havent had any luck. My dealer wants $140 for one. I think thats a little steep and thought someone might have made something a little stronger for...
  16. ATV New Members
    hey im having issues finding parts for this machine any ideas on where i can get a computer for the tach/hrs/speedometer? is it the same as the 525?
1-16 of 16 Results