Search Results for ‘axle’

Application: 2000 Polaris Magnum 500 Model A00D50AB Manual says to pull axle out "as far as it will go". Photo attached. Ok-- I'm having to drive the axle out with a piece of wood. I decided to stop once the axle started to move. So I suspect this is just because the rear is OLD and dried...

Hey all. New here. Just purchased a set of Niche Front CV axles for my 2013 Polaris sportsman 550 touring EPS. Got off Amazon for like $170 Canadian for the pair. Does anyone have any experience with these? I understand they are newish to the market. I don’t drive crazy hard but I like to go...

I have an odd, but hopefully easy to answer question. I'm trying to find out the number of splines and the diameter of the u-joint for the front axles of a Polaris Xplorer. I'm building a buggy, and I'm hoping these axles will work.

So I am looking for some new rear axles for my 2021 570 non sp. I’m wondering if the 2020 east lake rear axles will fit a 2021? I’m currently running outlaw 2s 29 1/2 and need new axles due to breaking both rear axles. Any help is appreciated.

Has anyone else been having issues with the front axles on the sportsman 1000xp? I somehow broke the left front doing casual woods riding, took it back to the dealer and they replaced it under warranty. Went on a riding trip this past weekend with normal riding, nothing extreme. Got it back home...

Hello All, I've been busy - have replaced my front axles, brake pads,brake fluid and I'm putting my 2012 Sportsman 850 XP EPS back together. That said I thought it would be easy to find the torque specs for the axle nuts - no luck!! Can anyone tell me what the torque setting is??

Hello All! New to this forum thing and also new to the polaris family! Just bought me a scrambler 850. I was wondering if there is any issues i needed to worry about? Also i plan on adding triangular snorkels, highlifter rad kit, 3000 lb warn winch, k&n filter, 12" lightbar, 3" lift, 29.5" ol2...

Hey guys. Im new to the forum and polaris in general. I just picked up a 2005 polaris sportsman 700 efi. Having a few problems. 1) The shifter is very sloppy. Has about 3/4 an inch of play, and when i look back to where the shift rod goes into the gear box, the bracket that connects them...

I have a 2003 sportsman 600 twin I just noticed that my left rear CV joint is clicking. The boot is ripped and the joint makes the clicking noise when turning. I know this is a common problem/fix so just wanted to know what others have done and what my options are. I looked on partszilla...

A quick little video. First Edit i have ever done, so sorry in advance if its not so good! This was last ride on my 2" Highlifter lift kit as my backwoods armor kit and Gorilla +3 axles will be going on soon! So i figured go out with a bang! Was also my first time out with the New 29.5x11x14...

Hey Guys, Broke a rear axle this weekend and need some help getting the outer joint apart. I've tried to read as many threads as I can and didn't see what I need help with. If I missed it somewhere I apologize. My plan is to get an aftermarket shaft, but for only $42 bucks for the shaft it...

I just got a new 2013 sportsman 500 with plans to put mud tires on it, problem is, it is bone stock and has only 24 miles on it and i found the front axle tore up. boot is still on but tug on the axle and you feel that it is clearly broken. I went through one mud hole. I have experience mud...

I have tried everything I can think of to get this axle out! I have tried the three jaw puller with fuel hose and hose clamps and a 5lb slide hammer. I have tried the vise grip attachment on the slide hammer. I have tried a come-a-long. Any suggestions? I have the half shaft off and the only...

2005 polaris sportsman 800 ok, so here's the breakdown of what went down and where im at the night before the last ride my buddy and i are packing everything up and he asks me if i ever checked my diff fluids, i said no. he said, you should, so i did, and whaddaya know, my front diff was full...

Hello, this is my first post on the forum. I bought a used Phoenix for my son and I didn't notice this problem until we had it home for a few days. There is an odd 'creaking' noise that seems to be coming from the rear end. I used a makeshift stethoscope to try to narrow down the location but...

Ok, I have read many of the threads about CV problems, specifically clicking noise. I have the same problem, and I hear it when I am going slow (starting to move), in reverse or forward, and it only happens when turning to the right. THe noise appears to be from the right rear. My questions...

My 99 Scrambler needs a new axle what years and models will interchange with mine??? It's 4x4 that is axle driven not chain and it's the 400