Search Results for ‘cam’

There are multiple problems with the cam/valves on my 2016 570 midsize crew. First, the intake valves are stuck open. I've removed the head and the cam and you can see light through between the valves and the head. I'm not even sure physically how this can happen unless the valves seized in...

I just need to know if im screwed or if there is anyway around spending lots of $$$. I did a trade with a guy on facebook to swap my kx450f for a outlaw 500, at first i thought great trade. But no, it started not running right after a ccouple hours and judging by online Forums it seemed like my...

I've been working on getting my 2004 atp 500 running right. I'm almost there but still have a problem with the thing running lean. It starts easily (when choked) but misses and backfires when revved up. Hard to get it to idle when warmed up with no choke. I've gone over it several times and...

Hi All, I am new to this site and also new to quading. This will be my 1st and I haven't riden one yet. I have been riding dirt and street bikes almost 40 years. I picked up this 2001 Magnum 500 with about 1300mi, 173hrs, that had low compression. Took the head off and found that the Cam...

Hi All, 1st off thanks to all of you posters that I have already learned so much from. I am new to this site, and new to quading. Actually I've never really riden one yet. I picked up this 2001 Magnum 500 with about 1300mi, 174hrs that had low compression. Took the head off and found that the...

I was out riding for about 15min, and I stopped and turned off the machine. I went to start again and it would not start. Gas was leaking from the bottom of the Carb so when I got back home I took it to the dealer who just installed the brand new carb. They called me back and said the float bowl...