clutch kit

Hey guys, just thought I'd take a moment to review the epi clutch kit WE437439, which is for 2016 and 2017 sportsman 570s with ebs. I have yet to find a review on it, but bought it because I've had great experience with clutch kits in the past, so took a chance. First off, the secondary clutch...

I have a 2010 sporty 500HO that I’m getting ready to put some 27 inch Quadboss QBT672 tires on (27-9-12 fronts and 27-11-12 rears). My question is what would be a good clutch kit to not have a power loss? Was thinking RVS performance. I use my quad for trails, hunting, light to moderate mudding...

I recently bought 28x9x12 mega mayhems for my 570. Just curious if anyone else has put these tires on and have not got a clutch kit. Should I purchase a clutch kit before I take it out mudding with these new tires? I also got a 2” lift kit for it, would getting new axles be a good investment?

Just picked up a set of 26" Sedona Ripsaws for my 2013 Sportsman 550 2up. Any suggestions on a clutch kit to help offset the weight of the tires?

Anyone know of a clutch kit out there that would fit the 2016 sportsman 1000 touring? EPI is not sure if their kit would fit the 2016 touring model. Highlifter has one for 2015 1000 touring but they dont think it would fit the 2016 1000 touring. If by some ridiculous chance someone has a 2016...

When installing the QSC clutch kit the primary spring and weights went in just fine and fit as the stock ones did. When installing the secondary spring I noticed the new QSC spring didn't have "prongs" to put in the holes of the clutch and helix to turn it and set the tension. It fits ok, but...

Ok so I'm new here and am hoping to get some helpful information. I have a 2014 sportsman 570 and I added a 2 inch lift and lastly a EPI sport utility clutch kit for it with a severe duty belt. I picked the kit that runs 27"tires since I put 27" itp mudlite xtr's With ITP steel wheels. The kit...

I know there are many threads about clutching these machines when you upgrade tires. I didn't see an obvious answer for my question so I started this thread. I know there are more factors to consider that just tire weight, but as a General Idea-Rule at what point is adding a clutch kit come...

I installed hotseat performance clutch kit and I can't tell any difference from the stock one I have a 2002 trail boss 325 anyone know what I could do to get more throttle response

Im thinking of ways to get a little more umph out of my wheeler, She's an 05 400 and does about 45 top speed, which is not bad for the size but it would be cool to get a little more power out of her. I figured that the easiest/cheapest/quickest way would be to get a clutch kit. Anyone have a...

Wassup?!? I'm new to the forum. Just wanting to know if anyone knows where I can get some aftermarket parts for the 400 ranger. Clutch kit, exhaust, things of that nature, or do they even make anything like that? Also, whats the lug pattern? I'm looking at getting some custom wheels. I'm in the...

Ive got a 2007 polaris scrambler 500 ho. I love the quad to death. It gets me anywhere i want to go. I was kind of wondering if there is a good clutch kit that i could use to get a little more torque at the start. I feel like with the amount of motor i have i should be able to get a little more...

just went out for the weekend and was only able to ride for about 1-2 hours at a time before my "hot" "check engine" light came on. i just changed the oil(royal prurple 10-40), new spark plug (ngk iridium), new air filter (k&n), and the biggest thing i did are the new tires (ITP mud lite XTR...

Hey guys I'm new to owning a Polaris. I have been doing a lot of work on my used 2001 Sportsman 400 4x4. I had noticed the new belt was loose that I installed but didn't know how to tighten it so I took it for a ride this weekend to see how it ran. It ran well on flat ground but when it came to...