Polaris ATV Forum banner

clutch

  1. ATV Repair and Maintenance
    So I recently purchased a 2004 magnum 330 for around 300 due to it catching fire and the wiring harness needing replaced. I have since replaced the harness now the thing runs like brand new, even got some big ol mud tires on it. But the issue that I am having is when I go to shift it into high...
  2. Polaris Sportsman XP 1000
    Its a 2015 Sportsman 1000 xp Limited. I just got the wheeler i have a gse exhaust and air filter also a stage 2 RVS tune. The max rpms im getting is about 7400 at about 73 mph. And thats as fast as it will go. I cant stand it up and lower speeds either. Also i blew 2 belts in a matter of 2...
  3. Polaris Magnum
    Back again, After getting the Magnum 425 4x4 to start, now I have a new problem. After putting it in Lo the ATV would not move forward, even after rocking it. If I gave it 1/3 throttle, it would sometimes go. There is a rattling, at idle, in the clutch cover. I took the cover off, put it in...
  4. ATV Repair and Maintenance
    Hello , I am facing a problem with my 01 Sportsman 500 6x6. It makes a squealing noise in high gear () I changed the belts and adjusted the scondary clutch washers with no improvement. The noise only happens when in high gear and when torque is applied. The ATV does not make noise when it runs...
  5. ATV Repair and Maintenance
    I picked up a 2018 Polaris Sportsman 450 EPS with only 145 miles on a trade. The thing looks practically new, but it runs and drives rough. Engine makes a screeching noise st idle and when starting to drive slowly it gets really loud. The seller said he thinks it need the bottom end rebuild...
  6. ATV Repair and Maintenance
    Just picked up a 2002 Sportsman 400, in good shape but the outer clutch cover could be replaced. Can't find anything about it but there's a 2005 500 HO being parted out near me, and wondering if that cover would fit? Part numbers are different but from what I'm hearing the only difference is a...
  7. Polaris Predator
    Wondering if someone can take a picture of the mount for the clutch cable near the actuator arm. Currently having a problem where I’ll pull in the clutch lever and if starting in gear, it will pull the bike forward. Anybody else have problems with the clutch not disengaging?
  8. Polaris Scrambler XP 1000
    Hey everyone, hoping I can get some help here from you guys. I've got a 2020 scrambler xp 1000 s, it's a great machine other than I've had to put 5 belts on in 900Km. It's been to the dealer numerous times for the same issue. They covered the 1st belt under warranty. But the other 4 have been...
  9. ATV Repair and Maintenance
    Hello, I hoping someone would have guidance. I use my machine to plow snow. Always in low. Today when plowing, I noticed a clicking noise almost like something was binding and releasing. Came from the clutches. I immediately tore it down and could find nothing wrong besides the belt was a...
  10. Polaris Sportsman
    Recently I ran my polaris sportsman 500 ho EFI out of gas trying to get to to my shop that had a gas canister and filled it up right after it ran out and it won't start back up. When I start it, it likes to rev up and sputter then die. I did notice the oil was low and filled it back up and tried...
  11. Polaris Sportsman 570
    So I’ve been having this issue where on deceleration my belt will start to flop around and hit the top of the clutch cover. It is most noticeable right before the clutch releases and the ATV freewheels. I purchased the quad in 2015 and about mid 2016 is when I noticed it doing this. It’s done it...
  12. ATV Repair and Maintenance
    Hi everyone, I have a new 570EPS Premium with 69 miles on it. I noticed a clunking sound around 35 miles on the machine. It only happens when I am at 3mph. I ride alongside my dog in the afternoons, usually about 5 mph but when I slow down it starts the noise and is kinda bucks. It has started...
  13. ATV General Discussion
    Hello guys,i’m asking if a 24-60G or 24-56G will work properly with no issues on my sportsman 850 touring 2010 and how will affect the riding.The stock ones mounted are 24-63G.Thank you
  14. ATV Repair and Maintenance
    Hey just wondering if anyone else has had as much trouble getting their snorkel pipe to stay sealed on to their clutch cover as me. 2013 Sportsman 550 XP, I'm not sure what brand of snorkel as the invoice just said "snorkel kit". When it was first done years ago it was sealed on there good but...
  15. ATV General Discussion
    I have a 2016 570, 2015 850, and looking at getting a 2018 1000. I hate the EBS. Does anyone know how to fix the aggressive brakes? If there is a kit to replace the clutch, can you please provide a link to order the replacement part. Also is there a “break-in” period where the EBS won’t be as...
  16. Polaris Sportsman 570
    hey guys im new to the forum and also pretty new to owning an ATV and working on them. two questions here kind of. i recently bought a 2019 sportsman 570 6x6 and have some questions about whether or not i should get a clutch kit on it or if the tires im running are just too big. the machine came...
  17. ATV Performance Modifications
    I have a 2010 sporty 500HO that I’m getting ready to put some 27 inch Quadboss QBT672 tires on (27-9-12 fronts and 27-11-12 rears). My question is what would be a good clutch kit to not have a power loss? Was thinking RVS performance. I use my quad for trails, hunting, light to moderate mudding...
  18. ATV Repair and Maintenance
    I have replaced 3 one way bearings in the past 3 weeks, i inspected it some more and it seems that the belt is crooked on the clutch on the transmission. I really need some help with this any thing will help. Thanks.
  19. ATV General Discussion
    I have a 2018 850 that I've already had the primary clutch replaced under warranty due to creeping. I'm experiencing issues where shifting is getting difficult and when I put it in gear the bike rocks but doesn't creep. I would like to put an aftermarket primary in but there doesn't seem to be...
  20. ATV Repair and Maintenance
    I have a 2000 Polaris magnum 325 that I replaced the Primary and belt on.The primary was missing the buttons completely and the sheaves were warped. I took apart the secondary to inspect it. It is missing the buttons ordering those now. BUT, my questions is what is the stock spring set up on...
Top