Polaris ATV Forum banner

crank no start

  1. Polaris XP
    I have spent long hours troubleshooting someone plz help Tps .626 volts Crank position .552 ohms Cylinder 1 and 2. 180psi and holds Fuel injector 14.2 ohms each Fuel pressure 40psi and holds Tbap sensor pigtail new Tps pigtail tested for continuity Crank pigtail tail tested for continuity...
  2. ATV Gear and Gadgets
    While plowing drive way with my 2014 570. (400miles), idle rpm was 2000-2100 (too high to even shift). Finished driveway and parked quad outside garage for 2hrs (had apt). Came home to pull quad in and it would roll over but wouldn’t fire. I can hear fuel pump run, and after several attempts to...
  3. ATV Repair and Maintenance
    PLEASE HELP!! I’m in need of a wiring diagram for an ACE 500 wiring diagram. I have a no crank no start, I’ve read I think about every thread there is about no crank no starts, all the safety switches are good. I have no power at the EFI relay or the center row of fuses(30amps), and no power...
  4. ATV Repair and Maintenance
    I have a 1999 Polaris Xplorer 400 4x4 that will just crank and crank for days, but won't engage to turn over. Below is a list of what I've tried. I'm out of ideas at this point.... Replaced battery with new one - it is fully charged Replaced starter solenoid with new one New spark plug - I...
Top