Polaris ATV Forum banner

drive

  1. Front Prop / Drive Shaft Install - 02 Sportsman 700

    ATV Repair and Maintenance
    Hey all... I've got an 02 700 and the previous owner had removed the front prop / drive shaft to change the u-joints but never got around to it. I replaced them and went to install it back today but couldn't seem to figure out how to get it back in could somebody provide some information? The...
  2. Hole in Drive Belt Cover

    ATV Repair and Maintenance
    Does any have a solution for patching holes worn into the drive belt cover. The holes are on the top and bottom caused by rubbing of the main clutch. I'm thinking about flexing the plastic out with a heat gun and patching it with thin sheet metal, bent to shape, and with small bolts. Then...
  3. "08 Front Gearbox Cross Reference

    ATV Repair and Maintenance
    Hi. I"ve been trying to find a cross reference to tell me if I can replace my 1332568 ADC front gearbox with with a non ADC 3235162 gearbox? Or any other that I can find?. Anything that will work really. I live on the prairies so having ADC really isn't too important. If anyone can help out, it...
  4. Xplorer 300 Rear Sprocket

    ATV General Discussion
    I am new to this site and have a question. I am replacing the rear sprocket on my 1998 Xplorer 300 and have hit a snag. I tried removing the bolts holding the sprocket on and found that the bolt head is round and is recessed in a round hole. Either something is broke/wrong or I am missing...
  5. drive clutch compatability

    ATV Repair and Maintenance
    I need to replace my drive clutch on my 2003 sportsman 500 ho. I am wondering if anyone can help me. I see lots of clutches on the internet but can not figure out which ones are compatible. How do i figure that out? Thanks in advance for any help.
  6. Noise when releasing gas ???

    Polaris Sportsman
    Hi, im new to the forum and bought a Sportsman 800 about 2 weeks ago with 56 hours. Everything is running good without any problems except...when i release the gas, there is a funny noise comming from the bottom. It feels like there are "play" in the drive shafts or something... any ideas??
  7. HELP! Tightening the chain on a scrambler 500 4x4

    ATV Repair and Maintenance
    I have what i think is a 2002 Scrambler 500 4x4 that sat around for a little while. The only problem i have besides a slightly clogged up carb is that my chain has gotten a lot looser than it used to be. I've tried just reading directions from other people on how to do this (i also lost my...
Top