Polaris ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. ATV Repair and Maintenance
    I have a 2000 Polaris magnum 325 that I replaced the Primary and belt on.The primary was missing the buttons completely and the sheaves were warped. I took apart the secondary to inspect it. It is missing the buttons ordering those now. BUT, my questions is what is the stock spring set up on...
  2. ATV Repair and Maintenance
    new to the forums, if there's already a post on this please direct me there. I have a 2005 sportsman 400. went to start it up for the first time this season and heard something wrong in the clutch housing. pulled the cover off expecting the belt to be bad but it was in perfect shape, just...
  3. ATV Repair and Maintenance
    I recently bought a used 2000 Polaris sportsman 500 4x4. The CVT belt started to shred and CVT was making a high pitch whirling noise, so I decided this was a good time to do maintenance on the clutches. I bought an EPI clutch kit and an EPI severe duty belt because I drive through a lot of...
  4. Polaris Trail Boss
    I purchased a 1992 350L Trail Boss that I am removing the engine for rebuild. I bought the tool for removing the drive clutch and have it off but the driven clutch wouldn't budge after taking the bolt out. Is there another tool that I need for this clutch or a method that I am missing?
1-4 of 4 Results