Polaris ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Polaris Sportsman
    First of all, I`m not mechanicly skilled, by far. But my Big Boss broke down far from accessible road, so I have to fix it where it is. So - The yoke and u-joint on my rear driveshaft broke with a bang. I`ve bought a replacment yoke and u-joint, and managed to get the broken yoke off (%#&ing...
  2. ATV New Members
    Needing some help. I bought an ATP 500 new from the dealer in 2005. This is the 2 year model run with the dump bed and solid rear axle. It’s at 1,110 hours and 6,700 miles. This is my main rig for checking cows, running fence, and farm chores. This week my rear wheels stopped turning while...
  3. ATV Repair and Maintenance
    Hey all, so I have a 2003 polaris magnum 330, and the rear driveshaft is missing the splines, and it has eaten off the teeth from the coupling to the differential too. One of my buddies has a broken 2004 sportsman 400, and I was wondering if the driveshafts and couplings are interchangeable? Thanks.
  4. Polaris Sportsman
    I have a 2008 sportsman 300 and a few years back both the front outer cv boots cracked and I continued to ride it through mud and dirt and now they both need to be changed. I’ve read you need to take the whole front driveshaft out I’m just really confused on how to take it out or if there is an...
  5. ATV Repair and Maintenance
    Hey all... I've got an 02 700 and the previous owner had removed the front prop / drive shaft to change the u-joints but never got around to it. I replaced them and went to install it back today but couldn't seem to figure out how to get it back in could somebody provide some information? The...
  6. ATV Repair and Maintenance
    I have a 2000 sportsman 335 and I snapped the u joints off the rear driveshaft and I am replacing them but I cant take the hub off the driveshaft. how can I get this off? thanks
1-6 of 6 Results