Polaris ATV Forum banner
1-6 of 6 Results
  1. ATV Brakes & Suspension
    EDIT: JUMP TO CONCLUSION: Highlifter vs. EPI HD Springs I've seen some rumors flying around on here about which spring has a heavier rate, which brand and what machines need spring adapters. I've seen rumors elsewhere that the springs are the exact same thing, produced in the same plant, with...
  2. ATV Performance Modifications
    Ok so I'm new here and am hoping to get some helpful information. I have a 2014 sportsman 570 and I added a 2 inch lift and lastly a EPI sport utility clutch kit for it with a severe duty belt. I picked the kit that runs 27"tires since I put 27" itp mudlite xtr's With ITP steel wheels. The kit...
  3. ATV New Members
    Hey guys, my name is Frank. I've been a reader for several years. Traded in my 14' 800 for a new 15' xp 1000. Night and day difference in power and handling. Anyway, as you can see I have a few things listed in my Signature. I'm looking for a set of front/rear stiffer springs. I called...
  4. ATV General Discussion
    Hey guys, I want to order some hd springs for my 2013 sportsman 500 . As far as I can tell, polaris only makes springs for the front, and I can't find a listing for the rears with Epi or highlifter...the listings only go up to 2012...has anyone put these on a 2013?
  5. Polaris Trail Blazer
    A couple years ago,I purchased a 2001 trailblazer 250 that had recently had a new top end bored to .040. I have since installed a new 38mm(400cc) carb and a FMF fatty gold exhaust . I have also installed a EPI performance clutch kit. The trailblazer had both lower and upper power to spare for...
  6. ATV Performance Modifications
    I was wandering if anyone has tried the dalton DBW 500 for the 2004 500 ho. I know I want a clutch kit to decrease belt slippage.
1-6 of 6 Results