Polaris ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-8 of 8 Results
  1. ATV Oil, Lubrication & Filter
    I fully understand this topic has been beat to death and fluid opinions are like a holes, I recently added a 2008 Rzr 800 to my garage and I want to simplify Maintenance with my 14 Sportsman 570. Speaking with some other experienced people, I have come up with Shell Spirax S4 TXM as an...
  2. ATV Oil, Lubrication & Filter
    Just purchased an 18 base 570 and would like to change all the fluids. Is the Trans fluid separate from the Rear diff. fluid? Apologies if this is probably a silly question but I am new to this. Thanks
  3. ATV Oil, Lubrication & Filter
    Good Morning, I purchased a used 2012 Polaris Sportsman 850 EPS roughly 5 months ago that had 600 miles on the machine. There was only one oil change done on the ATV since the original owner had it and I can tell it is starting to run a little rough as I have put on another 200 miles on it...
  4. ATV General Discussion
    It looks like I need to remove my winch on my 2014 sportsman 400 to change the front diff fluid. Is that the case? Also I changed my oil and trans fluid and the trans fluid I put in looked a lot thicker then what I drained. I went by the part number in the manual for the fluid, off page 129. I...
  5. ATV Repair and Maintenance
    OK, I have searched the threads and not found exactly what I am looking for. I just purchased a 2012 Sportsman 400, and am setting it up for use primarily OVER 10,000 ft., in Colorado. This is what I am in the process of doing. If anyone else has dialed in a 400 for high altitude use, please...
  6. Polaris Sportsman
    My apologies if any of this has been answered anywhere else in this forum but i have not found anything yet. I am new to the ATV world and am starting my adventures with a 2004 Sportsman Twin 700 ;-) It is in great shape and low low miles but i want to start with fresh fluids. I have changed...
  7. Polaris Sportsman
    All, Just finished changing fluids on my 04 500 HO and wanted to grease the ball joints and shaft yoke. Noticed the ball joints has a fitting that looks like it needs a special end on the grease gun. Can anybody tell me what size the fitting would be and how many pounds of pressure (on the gun)...
  8. ATV Repair and Maintenance
    I had to read almost two months in forums to decide which fluids to use in my recent bought pre-owned 2003 Sporstman 500 (that looks and feels like new) if I can’t have the original fluids from Polaris or the amsoil (believe in my country we have only autozone with car oils available) products...
1-8 of 8 Results
Top