Polaris ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Polaris Sportsman
    Hello All, I've been busy - have replaced my front axles, brake pads,brake fluid and I'm putting my 2012 Sportsman 850 XP EPS back together. That said I thought it would be easy to find the torque specs for the axle nuts - no luck!! Can anyone tell me what the torque setting is??
  2. Polaris Sportsman
    I just got a new 2013 sportsman 500 with plans to put mud tires on it, problem is, it is bone stock and has only 24 miles on it and i found the front axle tore up. boot is still on but tug on the axle and you feel that it is clearly broken. I went through one mud hole. I have experience mud...
  3. ATV General Discussion
    I just purchased a great previously owned 2009 Sportsman 500 HO for ice fishing, hunting, etc. This is my first ATV. I would like to mount a gun/auger mount to the front storage lid. It appears to be a stock lid that has two steel rails that run the width of the lid. Each rail has semi circle...
  4. ATV Repair and Maintenance
    I just purchased a 2008 Sportsman 300. After burying myself in a mudhole, I realized the AWD wasn't engaging. It doesn't want to go at all, I am familiar with the fact that the rear wheels must spin before it will engage. My battery tests out OK and my wiring down into the front...
  5. Polaris Sportsman
    I have a 2002 sporty 500 HO and the front LH CV was making popping noise so I tore it apart and of course the CV was dry. Upon further inspection, I noticed that the CV was rubbing the inside of the strut. Someone had put shims in behind the inside strut bearing at sometime (found one still...
1-5 of 5 Results