Search Results for ‘oil leak’

I have an oil leak (light mist) from where my stator wires enter the engine. I replaced the stator about 2 years ago and don’t remember much about the internal area of it. Any suggestion on stopping the leak and is this something common?

Hello, My family bought a pair of 2003 trailblazer 250's (they're the blue ones with the yellow decal) and one of them leaks oil from a few places, oil coming off the exhaust and around the engine, i can provide pictures if needed. the other one kind of spatters off fuel when running. both quads...

2014 850 sportsman 33 hrs and 200 or so miles. Hasn't had 1st service yet. ran perfect when parked. It hadn't been cranked in a couple of months. I backed out of the garage and it started right up. 1 lap around the house and parked it in the drive way. What did I find to my surprise almost all...

2014 850 sportsman 33 hrs and 200 or so miles. Hasn't had 1st service yet. ran perfect when parked. It hadn't been cranked in a couple of months. I backed out of the garage and it started right up. 1 lap around the house and parked it in the drive way. What did I find to my surprise almost all...

the leak starts when the rpm is high 1. can i close this opening ? 2. why is that happening ??

Hey all, im new to the forum and hoping to find some help on what you guys think is going on with this quad.. I just bought this 96' sportsman 500, knowing that it may need rebuilt. It starts(a little difficult at 1st) and runs smooth(bit of a high idle), it drives good but top speed is...

So recently i sold my 2001 sportsman 500 and bought a 2008 outlaw 525 irs. Now im running into a few problem so maybe someone could help me?! So my first problem is i have a oil leak witch i think is just from to much oil but my main problem is its smoking! i have no idea why. When i bought the...

2004 ATP, 330- I have oil leaking from the brass pressure fitting leading (or returning) from the oil cooler on the motor side. I removed the fitting from the block and it looks fine. I put teflon tape on the fitting and reinstalled with no luck? What am I missing?!?

Hi, I'm not an ATV mechanic but I am a pretty good wrench in general - so I'm not a moron or a newb Had a prob w/ my 02 330 mAgnum 4x4 running like junk. Sooo Once again i pulled the carb and went through it. YAY runs liek a champ (again) In the process, I thought maybe the line from the air...