Polaris ATV Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 12 Results
  1. ATV New Members
    I'm the new guy. I'm an experienced rider but I'm just learning about the mechanics. I'm doing the rear left CV/axle on my Polaris 400. The inner race fell apart the bearings fell out and the inner CV stayed in the transmission. I'm having a very difficult time trying to get it out any...
  2. ATV New Members
    Bought a used scrambler 850 came with busted snorkel , not needed anyway. Took the heads off but still have the rest connected running towards the back end of quad. Once I take the snorkel out do I need to cap anything ? Or once I take it out that’s the end of that ? New here and to atv ...
  3. ATV Visual & Body Modifications
    I am going to re paint all of the blue plastics on my 2014 sportsman 400 H.O. and was wondering if anyone knew any articles or videos explaining how to do so. I dont want to break anything along the way.
  4. Polaris ATV How-Tos
    I just took all the warning stickers off of my relatively new 850 and boy does it make it look way better. It is a super easy process for anyone to improve the look of their bike. To take them off, first heat up the sticker with a heat gun or hair dryer a little bit, just don't melt it. Then...
  5. ATV Repair and Maintenance
    I have tried everything I can think of to get this axle out! I have tried the three jaw puller with fuel hose and hose clamps and a 5lb slide hammer. I have tried the vise grip attachment on the slide hammer. I have tried a come-a-long. Any suggestions? I have the half shaft off and the only...
  6. ATV Repair and Maintenance
    I am currently replacing the carrier bearings on my 07 outlaw 525 irs and i have it all apart. my last step was i used the special tool to get half of the axle housing apart. But the axle housing still will not come apart. is there anything im missing?? please put in some input!!!
  7. ATV General Discussion
    1997 Sportsman 400, sat on blocks for almost 10 years in the barn. I am trying to remove the starter. I have removed the recoil cover, (very clean inside, I was impressed). I managed to take out 3 bolts, cannot get to the upper bolt inside where the skid plate was. Any one have an answer please.
  8. ATV Visual & Body Modifications
    Anyone know how to take off the plastics as well as the foot pad on a 2011 polaris 500 HO? video would be great! Trying to get her all cleaned up and want to get into the tight spots before i bring it in to the dealership for service... Don't want them voiding my warrenty for "exsessive...
  9. ATV Repair and Maintenance
    Hello all! Here Is my problem. I have a 2009 500 sportsman the all black edition. I have had multiple times where the quad runs fine for a while then suddenly it dies and won restart. It acts like it is getting no fuel. Each time I have pushed it back to and on to the trailer. Got it home an it...
  10. Polaris Predator
    :wtf1: Is there a way to remove the carb on an 05 predator without removing the throttle cable assembly with it? While attempting to remove the carb, i could not figure out how to remove the throttle cable from the throttle assembly on the carb.
  11. ATV Repair and Maintenance
    I have a 1985 250 trailboss that has a weak spark and no power to the head lights and taillights. Looks like the stator but I went to pull the flywheel off and I now have question. It looks like a simpe pull using an automotive type harmonic balancer puller but there is the large aluminum piece...
  12. ATV General Discussion
    I have a fairly small driveway (4 cars long, 2 wide) and was considering a snow plow attachment to use in place of the walk-behind snow blower... not so much because the snow blower doesn't do it's job or is in need of replacement, but rather simply because I think it would be much more...
1-12 of 12 Results