Search Results for ‘switch’

I'm new to the forum, but just viewed an old thread from Polaris_Nut about installing a winch. It was a very informative video, but did not address a question I have. I recently purchased a gently used 2012 Polaris Sportsman 500 HO. It's in great shape with less than 600 miles on it! Going...

I replaced my ignition switch on my 92 trailboss 4x4 350L. It had bad tumblers and the old key was very worn which made the key hard to get to turn. After I replaced the switch, I can’t get the starter button or the lights to work. The atv will start and run with the pull start. Can anyone help...

HEY EVERYONE I AM NEW TO THE FORUM. I TRYIED A DIFFERNT FORUM THE OTHER DAY AND CANT SEEM TO GET ANY REPLIES.. ANYWAY.... I HAVE A 2003 POLARIS PREDATOR 90CC AND I AM TRYING TO FIGURE OUT WHERE AND HOW THE LEFT HAND SWITCH (STARTER/KILLSWITCH) GROUNDS... DOES ANYONE KNOW HOW THAT SWITCH GROUNDS...

Received a free 1996 Polaris Magnum 4x4 from a relative who had no time to try to get it running. Going through the wiring and fixing/replacing bare wires when I noticed something. In front of the handle bars there is a switch mounted that looks like it was rigged. I traced the wiring from...

Headlights on my 2010 Sportsman 500 not working. The switch works. I tested it out on my 400 sportsman. The voltage on the black wire coming into the switch is 4.8v and it should be 12v. The yellow wire is 0v when on high beam. Why is there not 12V coming into the switch. The other half of the...

hello! So, that little red switch on the left handlebar (OFF, RUN, OFF) has to be in an exact place for the thing to run, hence, I started looking for a whole new control part, however, I haven't been able to find exactly what I need, I've even looked at partzilla, anyone have any idea know...

I'm trying to help a friend with a Polaris XP Model # 2520673. The wiper does not run; troubleshooting showed that the switch failed but the motor is ok. I can't find any brand or part number on the motor assembly. Do you recognize this part? Is it feasible to replace just the switch? If...

I would like to place a 3 switch panel on my 2013 500. 1 to control a light bar, 1 to control small led underlights, and 1 to control a small led rear backup light. Just seeing if anyone has done it and if so post up some pictures. I'd like to get some ideas maybe where to put the panel. Thanks...

After a ride in the mud the other day I stopped by a lake where I proceeded to clean off my machine. Drove in to about a foot of water (below the footwells) and splashed water on the machine to clean off the access mud. Drove back home and the machine wouldn't turn off with the key. Tried...

Quick question to all the pros out there. When I flip my switch from 2x4 into AWD, the light is not indicated on the speedo display as it should be. all other lights and functions are working on speedo. Besides my bike being stuck in AWD all the time... hopefully thats a sep issue. Just...

I'm having an electrical problem with my 1994 300 4x4 that is affecting shifting / 4x4 / and the override switch. It seems to go randamly between 3 'modes', and I can't tell what makes it change from one to the other. I'll do my best to describe each mode/situation. They are not listed in any...

Hey everyone! I am trying to find a replacement for my 400's cylinder head temperature switch. I've been told that a switch from a Nissan may work or from an autoparts Place like Napa. I just need to know the temperature ranges on it to find a cheep sub for it, lol. Anyone still remember a...

I have a 2008 Sportsman 500 HO. Battery has been load tested, new solenoid. The ATV pull starts and if you jump across the solenoid it starts. The blue and yellow wires from the switch to the solenoid deliver, when the key is turned, 8.2 for the blue and 11.8 to the yellow. Which if the POD...

Hi all. '02 Scrammie 4x4 will not turn awd light on unless I leave switch on and shut down the machine and restart it then all is well, I can then shift from F to R and retain AWD function until I try to switch AWD off and back on again, then no AWD light and no AWD. I checked over a schematic...

Hi everyone. I have a 2000 ,600 Sportsman , and the factory toggle switch is gone on the winch ( I took it apart , and the spring inside was broke). Was wondering your thoughts on replacing the switch ( The original factory switch on the front rack is about $80 plus) I would prefer to move the...

I just bought a 98 500 Sportsman a day ago and I took it out and can't get the front wheels to pull. The axle shafts spin to the hubs, there is resistance in the coils (reading taken at the rats nest under the hood-like cover). It also draws about .34 amps when jumpered with a known hot...

Hello, Have a 07 Sportsman 500 HO. Was wondering if there is a way to bypass the neutral/park safety switch so I can start the machine up in gear? I used to have a 04 Sportsman and I could start up in any gear. And when I got this ATV its a pain in the ass to have to put it in park all the...