I've just taken the rear axle assembly completely apart (I just posted a bit ago about the axle problems), and the existing bearings are tapered roller bearings. I've seen sealed bearings that claim the fit this model. I'm not sure if this is common to have both roller and sealed bearings fit...

So the original Carb was lost when I bought the quad, so I went to my local store (JMC) and they advised me that the Mikuni Round Slide VM Series Carburetor 30mm Bore VM30-83, was the direct replacement for that machine..... I bought 2. (I have two of these second one still needs work) Well the...

Hi everyone new to the site. I have an 03 TB with some mods, Aaen pipe, clutch spring, rejetted carb ect.. my curent setup is 11 x 36 and was wondering if anyone has run a 40 or 42 x 11 setup and what you thought about it. its me sons quad and e do alot of trail ridding but some fairly fast...

I have a 99' Scrambler 400 4x4 with a cooked motor, that everything else is good. I also have a 2001 Trailblazer 250 2x4, that needs alot of work, but the motor was rebuilt last year. The plan is to swap the 250 motor onto the scrambler frame, removing radiator and what not, since the 250 is...

I just bought a 2005 polaris trailblazer 250. It runs good and everything but I notice a problem when you first start the atv it's really accelerated and stays that way. The acceleration it will not come down? And because of that it will not change to reverse or to neutral.? And if you change...

so i just bought a 01 trail blazer project from a guy, and he mentioned something about the chain keep on falling off the sprocket, so he went and bought new barrings for the axle. he never installed them and decided to sell the bike because he was low on funds. So when i got back home I noticed...

I bought a used 2003 Polaris Trail Blazer 250 about 2 weeks ago, it ran well on the trails for a few days then stopped running. It all started when i got a new battery (previous owner just used the pull start because they did not have the money to get a new battery) I went to pull start the...

I am new to this forum but I hope to learn a lot from you all... My first question is . I have a 2000 400 Trailblazer & I am trying to find an engine case for a friend of mine . I have found one that came off a 95 Scrambler and the guy is saying it's the same motor ( I can't seem to find out if...

I have 7- 2007 330 Trail Bosses and 1- 2008 330 Trail Blazer. These were all part of a guided tour business and the previous mechanic (in attempt to keep inexperienced riders from riding while standing on the rear brake) disabled the rear master cylinder somehow on all of them. I assumed that...

I have a 2008 Trail Blazer 330 with a broken hood plastic (The plastic piece in the front, center that goes around the headlight). Will the the hood from a (Lets say) 2004 Trailblazer fit? Or what about the Trailblazer 250s hood? They look the same with the exception of the colors. Stock on my...

Howdy, I'm new to the site, but like it already. I've got a 2000 trail blazer 250 without reverse and a 1996 trail blazer 250 without a gearbox, drive clutch (rear sheave has chunk missing from an over-zealous son) and missing rear brake rotor. Anybody ever do a motor swap from a '96-8 to a...

Hey! I'm new in this forum but it seems to have some expert people in here that can help me. My problem is that my Trail blazer 250 from 2002 won't start. The battery seems to be fully recharged and the gas and oil tank are full too. When I connect the battery cables to my car battery it will...

I have a 2002 polaris trial blazer that ran fine a couple of months ago then i sunk it in some water, after that it didn't run that good so we have another trailblazer in our backyard which is an older model but i don't know what year. So i switched the motors out and the motor was hard to keep...

Hello all, I just got a 2003 trail boss 330 the other day, today when i took her out she was running GREAT for a couple hours, im very happy with this quad!! That being said i did encounter a little problem. toward the end of my ride she started bogging down and backfiring (bad) if i got on...

Specifications Polaris Trail Blazer Engine • Starter : Electric / Pull • Compression Ratio : 9.2:1 • Displacement (cc) : 329 • Engine Stroke : 4-Stroke • Cylinders : 1 • Engine Type : Single-Cylinder Polaris Trail Blazer Transmission • Reverse : Yes • Primary Drive (Rear Wheel) : Chain •...

Specifications Engine • Starter: Electric / Pull • Engine Type: Single-Cylinder • Displacement (cc): 329 • Cylinders: 1 • Compression Ratio: 9.2:1 • Engine Stroke: 4-Stroke Transmission • Transmission Type: Continuously Variable (CVT) • Primary Drive (Rear Wheel): Chain • Reverse: Yes...