Polaris ATV Forum banner
1-3 of 3 Results
  1. ATV Repair and Maintenance
    It's time to replace the u-joints in my '03 Sportsman 600's front prop shaft. So, I soaked the front and rear splines with penetrating oil for a few days, then set about to remove the roll pin from the front yoke.....yeah, that ain't happenin'! I've spent countless hours, and an entire can of...
  2. Polaris XP
    I have a 2012 850xp. The front prop shaft seems a little loose on the transfer case side! The U-joint also seems a little looser then I would like. Is this normal or should I start looking for some replacement parts?? I also have a problem with the rear sway bar bushings (On the bar itself)...
  3. Polaris Sportsman
    Hey guys, I've been wrenching on the trans tonight. Got the thing out and on the floor. This machine has the older U-joint style rear axles, I can get the nut on the left rear to come out, but not the right. It seems that the axles are somehow connected inside. IE... If I loosen the right rear...
1-3 of 3 Results