Polaris ATV Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1
Hey folks Im in the middle of rebuilding my 03' Predator 500 and Im wanting to cleanup and repaint the springs on my shocks. Now Ive gotten the fronts apart and cleaned up , so now its time to do the rear and I can't figure out how to get the spring off the shock. Ive backed off the locking nuts and the springs are lose but unlike the front shocks the part that holds the top of the spring in place doesn't seem to come off as easily as the fronts. Is there a way of removing the top spring clamp? Any advice would be great. Thanks
 
1 - 2 of 2 Posts
Top