Polaris ATV Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hello, new to the forums, had the bike since day one. Service has been done to a T. Regular fluid changes and all. Just took apart the hubs in the front, cleaned them up and such and examined the armature plate which is a known issue to cause 3-wheel drive. All looks well.

But for some reason my bike when in 4x4 it'll steer to the right when going forward or backward simply because one wheel is turning in the front and the other isn't. Both left and right solenoids pull hard with force. Not sure what it can be. Any ideas? Should be the same setup as the sportsman 500's
 
1 - 1 of 1 Posts
Top