Polaris ATV Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
51 Posts
Discussion Starter #1
Snapped the left rear cv joint on my outlaw. It looks like the ball bearing just broke apart and the boot ripped a little. Doesn't look like anything happened to the axle it self but im pulling it apart tomorrow or Saturday. Is this a common problem on the outlaws with the irs?? Thanks Jon
 

·
Premium Member
Joined
·
20,001 Posts
Welcome to the board!:med:
 

·
Registered
Joined
·
521 Posts
not very common for it too snap at all but it does happen on occasion,,,,
 

·
Registered
Joined
·
94 Posts
new axle is like $600 last time I looked you can repair them to a point pretty simple stuff, and when I put it together put the new grease in the diff not in the boot around the cv axle
 

·
Registered
Joined
·
7 Posts
Polaris offers the complete rear assembly from axle end to axle end with all new hub and bearings. Part #1521150. Whole thing is $450. I had one of my center cv's assembled from new with only 5 of 6 ball bearing installed. Middle cv parts not available from Polaris, but did find on Ebay. $100 for new cv and boot, fortunately middle hub was not damaged.
 
1 - 7 of 7 Posts
Top