Polaris ATV Forum banner

1 - 8 of 8 Posts

·
Registered
2007 500x2 le
Joined
·
850 Posts
Discussion Starter #1
Hey guys I was out last night on my sportsy and it had a definte miss at 6200 rpm I noticed it a while back it did it a couple times and went away and now again it almost feels like a rev limiter but I know it shouldn't be at that rpm I have no batt light or engine light wondered if anyone else has had something similer I have 75 hours and 1100 miles
 

·
Premium Member
Joined
·
10,355 Posts
Yeah that's common. I have like 1500 miles on my 2011 and haven't had it happen in a couple of hundred miles.
 

·
Registered
2007 500x2 le
Joined
·
850 Posts
Discussion Starter #3
So just drive it ? I wondered if maybe I had something wet ot damp I'm gonna pull my plug boots out and just take a look at them I was wondering if a temp sensor or a tps would cause it ?
 

·
Premium Member
Joined
·
10,355 Posts
If it was anything it would be the crank sensor. But its an intermittent problem, basically just ride it and keep an eye on it. I have read its a programming/ecu glitch.
 

·
Registered
Joined
·
393 Posts
I would think that it is the rev limiter, my 800 will do about 72mph and I rarely hit 6200 rpm I think it hovers around 6050 or 6100. But if I just peg it in neutral it just hit the limiter at about 6200
 

·
Registered
2007 500x2 le
Joined
·
850 Posts
Discussion Starter #6
I think right around 6600 or 6700 is red line if I remeber correctly it isn't often I get it that high just thought hey see what it will do I was only doing maybe 60 mph or so I know it has done more then that before just curious if anyone else had a similer problem
 

·
Registered
Joined
·
1,538 Posts
Like all electrical type problems try applying dielectric grease to all of your electrical connections including your voltage regulator/etc. Let us know
 

·
Registered
2007 500x2 le
Joined
·
850 Posts
Discussion Starter #8
I finally had a chance to try it out again last night ! It runs great for a while the the next run rev limiter at 6050 to 6100 rpm then the next I can run up to 6400 all day if I wanted I'm wondering if its a ecu issue or a mapping glitch it runs great other wise no eng lite and well looked after
 
1 - 8 of 8 Posts
Top