Polaris ATV Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1
I found reading on the Polaris forum someone talking about how to verify the Pulser and Exciter coil. I measured right at 97 ohms on the Pulser coil. The Exciter requires 226 ohms, It is DEAD, nothing. So my question is the Exciter coil replaceable or do I need to replace the whole Magneto/ Stator/ Plate assembly ?

Thanks,
 
1 - 1 of 1 Posts
Top