Polaris ATV Forum banner

1995 xplorer 4x4 parting out

15K views 53 replies 16 participants last post by  tt425  
#1 ·
I am parting out a 1995 400 xplorer 2 stroke 4x4 chain drive. Some parts will fit on the magnum such as driveline and struts. See post in parts for sale. Thanks
 
#2 ·
is the engine trash?
 
#5 ·
brake light



As far as I know its there. I will check when I get off work this afternoon. I will get back with you. Thanks.
 
#4 ·
engine

I am parting out a 1995 400 xplorer 2 stroke 4x4 chain drive. Some parts will fit on the magnum such as driveline and struts. See post in parts for sale. Thanks
is the engine trash?
The top end has been tore down. The jug is scared but can be bored. I was told the counter balance may still be good. I have to look at it real good. Have not inspected it myself. I dont know alot about 2 stroke engines. I would like to sell the engine as is complete with jug and head. Make me an offer.
 
#6 ·
engine

I am parting out a 1995 400 xplorer 2 stroke 4x4 chain drive. Some parts will fit on the magnum such as driveline and struts. See post in parts for sale. Thanks
is the engine trash?
The top end has been tore down. The jug is scared but can be bored. I was told the counter balance may still be good. I have to look at it real good. Have not inspected it myself. I dont know alot about 2 stroke engines. I would like to sell the engine as is complete with jug and head. Make me an offer.
Talked to the guy that tore the engine down. The block is cracked
 
#11 ·
I sent e-mail couple minutes ago. Thanks
 
#16 ·
I have the rear shock but the bushing is bad, and I have the rear caliper. Make an offer
 
#18 ·
Speedometer has been sold. I will be out of touch for a couple days. (due to a national holiday) Opening day of Modern Gun Arkansas Deer Season). Thanks
 
#22 ·
I think I still have it. I will look 2 nite. Check back about 8pm. Thanks
 
#30 ·
I need a key for my magnum426 1996 4x4..anyone have a spare key or sell me an ignition with key??

thanks Dan
Keys are different. I have sold the ignition switch sorry.
 
#29 ·
I have sold all of those parts. Sorry.
 
#34 ·
No problem. I am always trading and buying junk older model atvs from time to time. Maybe next time.
 
#36 ·
I don't have a pull start for sale. I have a complete 1995 425 Magnum 4x4 non-running for sale. It doesn't fire. It has a brand new stator on it. It's local pickup only.
 
#38 ·
I will take a look. I don't have many parts of this atv left. If not I might have one of a couple other atvs. I will see what I have and do some comparing. I will let you know later this afternoon. Thanks
 
#46 ·
I don't have any of those items. Starter/bendix try db electricial(located in Tennesse, and the belt you can buy at a parts store such as Carquest. Belt part #'s are Gates G-Force #20G4022 and the regular Gates belt is PL30071. G-Force belt is better.
Thanks
 
#48 ·
If you don't mind this is MY THREAD please don't post on MY THREAD. You can start your own thread in the classified section. You can send him a PM. Dont use my thread.
 
#50 ·
I don't own this forum, but this is my thread that I started.