Polaris ATV Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
12 Posts
Discussion Starter #1
First I would like to say hello to everyone. This is my first post. I just traded a dirtbike I had for this wheeler. The explorer was leaking gas out of the carb on to the head. The po didn't have the clamp tight. Also the float arm in the carb is bent all to crap. I cannt find one,so I bent it the best I could.any help to locate is appreciated.once I got it to run, ruff but run, it would pop out of high.it seemed when I was getting on it real hard with the gas. Reverse doesnT feel like it's there and low just grinds. So I'm thinking the two are toast or maybe a adjustment? This is my first 4wheeler, so any help is great thanks
 

·
Premium Member
Joined
·
20,001 Posts
Welcome to the board!
 
1 - 2 of 2 Posts
Top