Polaris ATV Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
I broke the U-joint at the front right cv joint on my 2001 500 4x4. I ordered one from the dealer but it is too big. The inner dimension of the yoke is 22mm. Can someone please help me out with this- Im thinking its a yoke/cv joint off a 95-97 possibly. It does have inner locking rings on the ujoint. Any help would be greatly appreciated.
 

·
Premium Member
Joined
·
20,001 Posts
First off, welcome to the board!
 

·
Registered
Joined
·
1 Posts
I'm new here but I order one for 2001 polaris scrambler 500 4x4 I got it from Amazon it was a epi I put it in last night it fits my machine and it cost about 24 bucks so I thought it was a good deal hope this helps
 

·
Registered
Joined
·
3,420 Posts
Take the old u-joint to a parts store they can match it up. I bet it will be a #1-0170 NEAPCO brand or a 338 NAPA. If not give me the exact measurements and I can give you a part #.
I need diameter of u-joint and the distance between the locking rings.
 
1 - 4 of 4 Posts
Top