Polaris ATV Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi to all. Just joined. I have a 2003 Polaris sportsman 700 that I'm replacing the old Ducati ignition with the Kokusan (P/N 2202602) ignition kit. Got everything hooked up but the red/white wire coming off the CDI. There is a black/white wire and a red/white wire. The black/white wire connects to ground but I can't seem to find the connector for the red/white wire. I'm guessing the connector has been cut off. My question is does anybody know what wire I should be connecting that red/white wire from the new CDI to. Assuming (yeah I know) it goes to a 12 volt (switched?) source but just wanting to make sure so I don't hook it up wrong. Rather ask a stupid question then make a stupid mistake. Any help is appreciated.

Thanks
 
1 - 2 of 2 Posts
Top