Polaris ATV Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Before I tear into it too far does anyone have any tips for replacing the Pull start cord on my Polaris. Are there any tricks to it etc...??
 

·
Registered
Joined
·
527 Posts
Just be sure you remember how it goes together. Use a very light grease and do not over tighten the main nut that holds everything together. Also add a drop of blue loctite to the nut upon re assembly. These can be a breeze or they can be a pain in the a$$. Good Luck!
 

·
Premium Member
Joined
·
20,001 Posts
And welcome to the board!
 
1 - 3 of 3 Posts
Top