Polaris ATV Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
55 Posts
Discussion Starter #1
At first I thought the switch was bad. The one on the left handlebar that has the reverse override, headlights, and killswitch on it. When I would bump it, it would totally shut down the atv even the display. Then it stopped doing that so I thought I had ice in there since it was cold.

At the same time however, the speedo and odometer stopped working. They still do not work.

I assume it is related? Since the over ride button controls the display it seems likely.

Anyone have a similar issue and was it the switch?
 

·
Registered
Joined
·
5 Posts
Pop off the pod (top and bottom) as well as the cover below it. Cut the zip ties and inspect all the wires running around the column, specifically:

Red/white
White/red
Black/red x2
Black
Brown
Yellow

These are the most common wires to break that cause what you're experiencing. Check all wires closely, some aren't broken but will be cracked.

Lmk what you find!
 
1 - 2 of 2 Posts
Top