Check the fuse/circuit breakers. Jump 12vdc directly to the fuel pump harness to make sure the pump will actually run.
2007 Ranger 700 won't send power to fuel pump
Hi guys,
The voltage regulator and the battery melted while driving. I replaced those but I'm still not getting power to the fuel pump. Any suggestions?
Thanks in advance for any help!
The voltage regulator and the battery melted while driving. I replaced those but I'm still not getting power to the fuel pump. Any suggestions?
Thanks in advance for any help!
1 - 2 of 7 Posts
Check to see if getting power to the pump harness. If not, you probably either have a wire broken/burned into or an ECU problem.
Latebird might be able to shed some light on the matter. He's the resident electrical guru on here.
Latebird might be able to shed some light on the matter. He's the resident electrical guru on here.
1 - 2 of 7 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Polaris ATV Forum
A forum community dedicated to Polaris ATV owners and enthusiasts. Come join the discussion about Rangers, Sportsmans, Scramblers, Magnums, and others. Research modifications, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
Recommended Communities
