Polaris ATV Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
have a question about the baffle. i'm wanting to cut the end cap off and weld a new one on with a billet tip. does anyone no if the baffle is welded to the end cap
 

·
Registered
Joined
·
2,980 Posts
have a question about the baffle. i'm wanting to cut the end cap off and weld a new one on with a billet tip. does anyone no if the baffle is welded to the end cap
Why must you do this?
 

·
Registered
Joined
·
434 Posts
no it isnt when i did my mod with a hole saw and new tip i cut a 1.5" hole through the end cap then through the first baffle witch is about 3/4inch in
 

·
Premium Member
Joined
·
20,001 Posts
Welcome to the board!
 
1 - 5 of 5 Posts
Top