Polaris ATV Forum banner

2013 Polaris Sportsmant 500 HO will not start

1029 Views 5 Replies 3 Participants Last post by  latebird
Here we go.

I purchased a used 2013 Sportsman 500 HO (carbureted) knowing that it didn't run. The symptoms were when I turn the key, the display comes on (HOT ENGINE warning) but nothing else happens. No clicking or starter noise. The previous owner suspected it was the starter. I replaced the starter. Still nothing. When I turn the key, the display comes on but there is no clicking, nothing at all. I swapped out the ignition switch just to be safe. I then took it to a mechanic and he diagnosed a stator. So I installed a stator/rectifier. Then he said it would be best to install a wiring harness. So I replaced the entire wiring harness. Still nothing. The mechanic supposedly tested the handlebar switch and the awd/4x2 switches but I didn't do it myself.

Anyone have any thoughts on what this could be?

I would like to at least get some starter engagement but I don't know if the HOT ENGINE warning is killing the starter. I've never had a sportsman with a display before so i don't know how high tech they are. Thanks!
1 - 2 of 6 Posts
First do you have on the red wire with the white tracer at the starter solenoid?
is there 12vdc on the red with the white tracer when the key is in the "ON" position?
1 - 2 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top