Polaris ATV Forum banner

2013 sportsman 550 eps blowing 20A drive fuse when I engage 4WD

4K views 2 replies 3 participants last post by  bp405 
#1 ·
Whenever I engage the 4WD I blow the 20A drive fuse so I disconnected the 4 pin harness behind the front left tire and now it doesn’t blow although the 4WD indicator now still comes on even when disconnected I’m completely lost on what is going on!
 
#3 ·
So now you know the problem lies within the front diff. I would go over the electrical wiring that is attached the diff to make sure there is no damaged wires.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top