Polaris ATV Forum banner
Cancel

2020 Sportsman 570 Brake Lights stay on

9756 Views 27 Replies 11 Participants Last post by  bk2thez, 
B
Hi everyone I'm new to the forum. I have a 2020 sportsman 570 I have a issue where the Brake Lights stay on as if I'm on the brakes. I bled the front brakes to try and maybe release some pressure if that was causing it. It didn't seem to help the issue. I found the manifold where the pressure sensor is at for the brakes. I can't reach the plug to pull it out and I'll have to pull off the front end plastics. Is there anything else that can be causing this issue? I really don't want to remove the plastics If I don't have too or take it in for a service if I don't have too.
Reply
Save
Like
1 - 2 of 28 Posts
polman500
esmoglo said:
I am having the same issue with my 2020 Sportsman 570 the brake lights stay on and the brake lever is quite firm, I have Polaris extended warranty but it will take the local dealer three weeks just to look at my machine kind of annoying to have it down for a month. Has anyone changed theirs out?
Click to expand...
Sounds like the master cylinder may be over full / over pressurized. I'd pull the lid and check the level.
Reply
Save
Like
  • Like
Reactions: 1
polman500
esmoglo said:
Thanks, will check have had the unit since June/July 2020 first issue, but yes seems like its a pressure issue
Click to expand...
If you find nothing obvious with the MC/fluid then it may just be a bad switch.
Reply
Save
Like
  • Like
Reactions: 1
1 - 2 of 28 Posts
Polaris ATV Forum
A forum community dedicated to Polaris ATV owners and enthusiasts. Come join the discussion about Rangers, Sportsmans, Scramblers, Magnums, and others. Research modifications, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
ATV Repair and Maintenance ATV General Discussion Polaris Sportsman ATV New Members Polaris XP
Top