Polaris ATV Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
33 Posts
Discussion Starter #1
i'm thinking about upgrading my stock tires on my 2013 sportsman 850 to 28x10x14 EFX Moto MTC tires on the stock rims. will the 10" fit on the front without rubbing, or am I going to have to buy spacers? Also, this won't put too much strain on the axles will it?
 

·
Registered
Joined
·
54 Posts
I don't know much about clearance issues on these bikes. I'm new to Polaris, but after reading couple other forms i don't think 10" wide will work on stock wheels.
 

·
Registered
Joined
·
5,753 Posts
10s on the front are going to be tight I think. Only spot I think they might catch is the fenders when you turn. Also might want wider rims for them as the stock ones are 6" wide front and 8" rear. But I've never tried anything wider than 9 on the front.
 

·
Registered
Joined
·
54 Posts
10s on the front are going to be tight I think. Only spot I think they might catch is the fenders when you turn. Also might want wider rims for them as the stock ones are 6" wide front and 8" rear. But I've never tried anything wider than 9 on the front.
Ridinagain, man I need to talk to you. Can I get your email?
 
1 - 5 of 5 Posts
Top